Step 1 – Connect / Power-On Device
- Connect Provided Network Cable to port on bottom of device labeled “LAN”
- Connect Power cord to port on bottom of device
Step 2 – Obtain IP Address for Self-Management
- With the power cord connected, the Device will boot/power-up. After initializing, you should see info displayed on the LCD screen. Confirm device is powered on before continuing to next step.
- Press Menu button on right-side of phone.
- Press 2 for Status
- Press 2 for Network
- Press 1 for TCP/IP Parameters
- Note the value of IP: _________________
i.e. 192.168.1.201 (one-nine-two-dot-one-six-eight-dot-one-dot-two-zero-one)
Step 3 – Configure Device through Web Browser
- From your computer open a web browser
- Please enter this into your web browser at the top of the page. An example is 192.168.1.201
- The default username is admin and password is 456
- In top navigation, navigate to Settings -> Provisioning Server
- Update Server Type to: https
- Server Address: http://208.89.105.59
- Update field “Server User” removing anything populated in field
- Update field “Server Password” removing anything populated in field
- At bottom of screen click Save
- If prompted to save configuration changes click Yes
- Your device will restart 1 or more times while the Device is re-provisioned to the new settings. During this time the lights on your device will go blank / blink. When the device is ready, the Line1 indicator light should be solid Green.
Step 4 – Obtain Device MAC
- Press Menu button on right-side of phone.
- Press 2 for Status
- Press 2 for Network
- Press 2 for Ethernet
- Note the value of “MAC”: _____________________
i.e. 00:04:F4:1C:3A:2C
Step 5 – Obtain Device Serial Number (SN)
- Press Menu button on right-side of phone.
- Press 2 for Status
- Press 1 for Platform
- Press 1 for Phone
- Note the value of “S/N”: _____________________
0004f12a3b4c - Send S/N and MAC information to support to finish the build out.
Step 6 – Place a test call.
- Place test call to an “Off-Network” number to confirm calls complete.
- Place test call to an “On-Network” number such as another Employees Extension.